Collection: ST

Silicone Tubing

• Heat resistant up to 315°C
• Material: Silicone
• When sizing parts as a sleeve, the ID of the ST Tubing should be approximately equal to the stud diameter
• To ensure easy removal, cut the tube length at least 1/2” longer than masking length of the stud. This is especially important if the tube ID is smaller than the stud diameter by more than 2%
• When sizing parts as a plug, the OD should be 3-7% larger than thehole diameter
• Due to the low tear resistance of silicone, do not use pliers or other sharp tools for removal
• Can be used in conjunction with a standard cap to create a long, non-hollow cap